13
[3] Install Battery Plate on the Monitor
The following illustration is based on the optional LP-E6 battery. The
standard F970 and optional D28S plates are installed the same way.
1) Put the plate with the tabs in the channel on the monitor back.
2) Slide the plate to lock in into position.
3) Use the four screws that come in the box to attach the plate tightly.
[4] Uninstall Battery Plate from the Monitor
The following illustration is based on the optional LP-E6 battery. The
standard F970 and optional D28S plates are installed the same way
Remove the screws holding the plate
1) Press and hold the lock button in the middle while pushing the
plate outward.
2) Lift the plate upward.
Summary of Contents for M-702-4K series
Page 1: ...1...
