15
UPS is on and no power
to load
Output Jumpers is not
connected correctly
Check output Jumpers
No
power
on
output
receptacle
Check if the LS1 and LS2 are set
up from "001 to 000".
Backup time is short
Battery is empty
Re-charge the battery at least 24
hours
Battery aging
Replace Battery
Continuously sounding
and display turn to red
The UPS fails
Please contact your local dealer
Buttons does not work
The setting mode is not a
right path
please see right configuring method
Button is Broken
Please contact your local dealer
9. Software Installation
Winpower is UPS monitoring software, featuring user-friendly interface to monitor and
control your UPS. This unique software provides complete power protection for computer
system while power failure. With the software users can monitor any UPS status on the
same LAN. Furthermore, a UPS can provide security protection for more than one
computer on the same LAN at the same time, such as shutting down system in security,
saving application data and shutting down the UPS when power fails.
Installation procedure:
1. Go to the website: http://www.ups-software-download.com/
2. Choose the operation system you need and follow the instruction described on the
website to download the software.
3.
When downloading all required files from the internet, enter the
serial No:
511C1-01220-0100-478DF2A
to install the software.
When your computer restarts, the Winpower software will appear as a green plug icon
located in the system tray, near the clock.
