Quick Operation Guide
STEP 1.
Connect it to Power (A)
Please connect the applied AC adaptor to the DC IN jack on the
left side of this Portable DVD Player.
REMOTE CONTROL OPERATION RANGE
Point the remote control unit no more than about 6 meters from
the remote control sensor and within about 60
0
of the front of
the unit.
The operating distance may vary according to the brightness of
the room.
Note:
1.
Do not point bright lights at the remote control signal
sensor.
2.
Do not place objects between the remote control unit and
the remote control signal sensor.
3.
Do not use this remote control unit while simultaneously
operating the remote control unit of any other equipment.
30
remote sensor
STEP 2.
Connect it with earphones or connect it
to external equipment. (B)
If you want to enjoy higher listening and viewing quality, you can
connect this Portable DVD player to external equipment, such as
a TV or an amplifier.
Note:
1.
Before connections, make sure to turn off the power of this
Portable DVD Player and external equipment.
2.
Make sure to slide AV OUT/IN switch to AV OUT.
STEP 4.
Press POWER to turn on this Portable DVD
Player. (D)
STEP 5.
Press
<OPEN>
to open the disc cover. (E)
STEP 6.
Gently hold the edge of the disc, then put
it in the center with the printed side up.
Note:
Make sure the printed side of the disc is facing up.
STEP 7.
Close the disc cover.
STEP 8.
Press
<PLAY/SEL.>
to play the disc.
(C)
STEP 3.
Open the display panel. (C)
(B)
(White)
(Red)
(Yellow)
(Blue) (Red) (Green)
1
2
3
4
(A)
(D)
(E)
4
P-Scan TV
Pb
Pr
Y
(Blue)
(Red)
(Green)
Video input
S-Video
TV
S-Video input
3
TV
Video input
2
Audio input
(White)
L
R
(Red)
1
Back/front panel of external equipments
Note: Make sure the external equipment supports
the audio/video input feature.
