8. Other Operations
8.1 WPS
By WPS, you can establish Wi-Fi connection between IP Camera and router
directly too. This requires that your router has WPS function. If you are not sure
about this, please refer to your router user manual.
After the camera powered on and when its green LED flashes press the WPS
button on your router and its WPS light will flash, waiting for match. Then press
the WPS button on your IP Camera for 3 seconds and release it, after round 10
seconds the matching will finish.
If IP Camera or Router powered on and off or restarted, WPS connection should
be configured again.
8.2 Reset to Default Setting
Press the
RESET
button at the bottom of the camera until the green LED light off,
and release it. The camera will initialize itself again and back to default settings.
9. Tech Support
For technical issue, please contact your local distributor, or send us email at
[email protected].
For
Mustcam IPC Viewer
and
Search Tool
, please download at
www.mustcam.com/download
.
