2) Fasten, by tying, the conversion cap lanyard to the loop in the pocket
immediately in front of the inflator after passing it through the
opening in the cover (Fig.22).
FOLD #3
FOLD #1
FOLD #2
Right Lobe
Conversion Cap
Opening
Lanyard
FIGURE 22
3) Position the conversion cap over the inflator’s hydrostatic valve
opening. The conversion cap’s metal clip should be placed along the
top of the inflator’s hydrostatic valve (Fig.23).
FIGURE 23
4) Secure the conversion cap to the inflator’s hydrostatic valve by
applying pressure to the cap, at the metal clip.
FIGURE 24
Inflatable Vest with LIFT
TM
Owner’s Manual
16
Summary of Contents for MD0450 22
Page 2: ......
