manualshive.com logo in svg

Mustang Survival EP 38, Owner'S Manual

Share
Download
Mustang Survival EP 38 Owner'S Manual Download Page 37

37

ADDITIONAL INFORMATION

If you need more information about PFDs and safe recreational 
boating, contact your state boating authority, U.S. Coast Guard 
Auxiliary, U.S. Power Squadron, Red Cross, or your nearest unit of the 
U.S. Coast Guard; or call the free boating course number  
1-800-336-BOAT (in VA, 1-800-245-BOAT).

DO NOT ATTACH PFDS TO YOUR BOAT

Each PFD has straps, hooks, buckles, or other means for securing the 
device in place on the wearer. Some PFDs also incorporate decorative 
D-rings or tabs. Such items are not to be used to attach the device 
to the boat. Attaching the device to the boat will not permit it to 
perform as intended.

EXCEPTION: 

YOUR PFD HAS A BUILT-IN SAILING HARNESS (WITH WEBBING 

ATTACHMENT POINT AT BOTTOM FRONT) INTENDED FOR ATTACHING TO BOATS 
USING A QUICK-RELEASE UNDER-LOAD TETHER. SEE INSTRUCTIONS FOR USE OF 
SAILING HARNESS (P. 27). DO NOT ATTACH THE PFD TO BOATS USING ANY OTHER 
MEANS.

Summary of Contents for EP 38









































Reviews:

No comments

Brands by name

Popular brands

Load more brands