Operating instruction: O003 / 5759
Edition: 04/2019
Reproduction, duplication of this document - even a partial form –
are subject to our permission. All rights reserved.
In this data sheet any liability for changes, errors or misprints is excluded.
31
6
Configuration program
The configuration program makes any communication possible between a personal computer (PC)
and the integrated control unit, or the press and is used for loading the belt type lists and for select-
ing and saving the device protocol memory. For using the program please connect the PC with the
control unit via USB cable. The control unit gets automatically recognized by the PC and by this way
any USB-driver installation is not necessary as far as the used PC-operating system is of at least
Windows 2000
Always check after having switched the heating press if there is an appropriate control program in
the tool
.
In the display following message is appearing during some 3 seconds:
When the control program is valid, the operation can start.
Belt-type list
With the PC configuration program the belt type list can be loaded in the control unit.
The window can be opened using the menu „
HPS2->Belt-type list“
.
Please wait . . . . . . . .
