Operating instruction: B013 Edition: 01/2015
Subject to alterations.
15
5. The process is completed when a wedge with a thin aspect on the front is generated.
6. Please open the belt grinder by swinging it upwards, loosen the expander and remove the
belt.
Note:
It is easier to remove the belt material while using a brush with some ethyl alcohol between the
double-sided tape and the belt material.
7. Please clean the dust bag.
5.5
Bevelling the second end of the splice (operation side to the top)
Please recapitulate all the steps already described in points 5.3 und 5.4, however position the
operation side to the top!!!
