musikelectronic geithain TT12 SP Series, Instructions For Installation And Use Manual, Page: 28 / 36

OPERATION AND CONFIGURATION OF THE DEVICE
26
musikelectronic geithain GmbH TT 12 TT 15 TT 18K
Gain Adjust the gain of the channel, e. g. to adjust the balance or volume between analogue
and AES signals.
;
Mute: −48 dB … 12 dB
Delay: Delay every input signal, e. g. for compensation of different distances in a 5.1 set-up.
;
0 … 800 ms
;
0 … 900.94 ft
;
0 … 274.6 m
LowPass: Use low-pass filtering on the input signal with different slopes, filter characteristics
and variable frequencies.
;
Freq: 50 Hz … 20.000 Hz
;
Type: BUT 6, 12, 18, 24 dB; BES 6, 12, 18, 24 dB; LR 12, 24 dB
;
Enabled: Off … On
HighPass: Use high-pass filtering on the input signal with the same parameters as the low-pass
filter, e. g. filtering the low frequencies of the satellites in a 5.1 set-up.
;
Freq: 20 Hz … 20.000 Hz
;
Type: BUT 6, 12, 18, 24 dB; BES 6, 12, 18, 24 dB; LR 12, 24 dB
;
Enabled: Off … On
PEQ1 … 10: Parametric filters for adjustments to the room acoustics.
;
Gain: −12 … 12 dB
;
Freq: 20 Hz … 20.000 Hz
;
Type: Bell, Notch, High Shelf, Low Shelf, Allpass, Band Pass, High
Pass, Low Pass
;
Enabled: Off … On
;
Q: 0,1 … 25