musikelectronic geithain TT12 SP Series, Instructions For Installation And Use Manual, Page: 23 / 36

INSTALLATION AND OPERATION
21
musikelectronic geithain GmbH TT 12 TT 15 TT 18K
7.2 Starting up the speakers
Each time a visual inspection and functional check is recommend before starting up the speakers. If
there are doubts regarding proper operating condition or safety of the speaker, the speaker mustn‘t
be used.
When chain hoists are in operation ensure nobody is directly underneath or in the vicinity to the load.
7.2.1 Visual inspection
To reduce risk of accidents by failure or dysfunction of a component all systems need regular checks.
;
visual inspection of all outside parts for obvious damage (e. g. scratches, damages of any kind)
;
visual inspection of all mounting accessories for obvious damage (e. g. scratches, corrosion)
;
inspection of front grille and foam for secure attachment
;
regular lubrication of all sockets with WD-40 or similar products
7.2.2 Functional check
;
When the system is ready for operation turn up the level on the mixing console. Then the levels
of the top cabinets and bass systems should be balanced.
;
Adjustment of the systems is also possible without the software ME Geithain DSP Control directly
with the controls at the T
T …SP speakers.
;
Before switching off the system all speakers should be disconnected from mains. After that
switch off the remaining equipment.