KǁŶĞƌ͛ƐDĂŶƵĂů
DualLINK MIDI System
Rev. 1.5
Pag. 26 di 47
For the rest, the operation is identical to the MIDI Songs.
Naturally, if you start a MIDI Song, the MP3 Songs will be deactivated and vice
versa. Or rather, you can prepare a MIDI Song and an MP3 Song, activating
them one at a time by means of the Switch button A<-‐>B.
A<-‐>B
As you will have already seen, by means of this button, you can change from
the programming of Preset A to that of Preset B and vice versa, both for the
incorporated instrument Sounds (in the case of the DualLink DigiSound
version) and for the MIDI Program Changes. This button is also used to switch
between USB A and USB B for the Songs, and in all the parameters where
indicated. Obviously, this is active only in the PLAY section, whereas in the
EDIT section the programming of the Sound A and B is performed directly.
Global
Press this button to activate the Global function. Global means a series of
Registrations, Patches, or any other name the MIDI instrument maker may
have used, that incorporate a series of arrangements and sounds ready for
use.
In Edit, you can edit this function, but in the Play section you have the
possibility to select it directly, by entering a number (normally three digits),
but obviously this will depend on the parameters of the maker of the MIDI
instrument. If the number is less than three digits (one or two, e.g. 3 or 12)
just press the G key once you have entered the required number and the