19
- Cables: 4 cables of 15m with Speakon of 8 pins
2 cables of 15m with Speakon of 4 pins
4 cables of 1.5m with Speakon of 4 pins
- Speaker enclosures: 2 SUB-218BS
4 DP-G
4 DP-H
- Wiring: The two 15m cables with 4-pin Speakons are connected directly from
the rack to both SUB-218BS.
Two
1,5m
cables
with
8-pin
Speakons
are
to
connect
directly
Rack
A
to
both DP-G. Finally, the 1,5m cables with 4-pin Speakons are to be used to
connect the outputs of both DP-G with both DP-H. The same procedure applies
to Rack B and the other DP-Gs and DP-Hs.
Auxiliary equipment, such as effects, equalisers, mixing consoles, etc.
is not delivered with the live equipment.
In order for the DP-4 SYSTEM to work correctly, please make sure that you
link the signal coming from the mixing console (or from a possible effect
rack) to the sub bass rack and from there to both bass-mid-high channel, as
shown on the following diagram:
ATTENTION:
In
order
for
the
speakers
to
receive
their
signal,
Speakon®
connectors must be locked, turning them clockwise until the locking device
snaps in.
6.- CONTROL ELECTRONICS
Sine
the
Musicson
DP
system
is
“ready-to-sound”
live
equipment,
we
provide
all
elements
necessary
to
amplify
(power
amplifiers),
control
(dynamics processors) and wire the system the efficient and fast way.
