Nuvista 3D CD
Instructions for Use. Page 12 of 16
SPECIAL FEATURES
If at any time you make a mistake or wish
to delete a track from the list, press the
CLEAR
button to erase the last step.
Repeated pressing of
CLEAR
will then
erase each step in reverse order.
If you wish to check the selection before
playing back your program, the
CHECK
button can be pressed to step through each
track in turn. At the end of the check
sequence, the display briefly shows:
To play the programmed tracks press
PLAY/PAUSE
(or
INTRO
if required,
see page 11).
When all programmed tracks have been
played, the CD player stops. The same
track selection can then be played again by
pressing the
PLAY/PAUSE
button.
To cancel this mode, press
PROGRAM
.
The word CONTINUE then briefly
replaces track, index and time display.
Note: The entire program contents will be
cleared if you open the disc compartment
to load another disc, but this does not can-
cel program mode itself.
AUTOSPACE
The Nuvista 3D CD's AUTOSPACE func-
tion can be used to insert 4 second silent
spaces in between each track as it is played
back. This can be useful when making
cassette recordings of CDs. Some cassette
recorders feature a track skip or search
function which uses the silent gap between
tracks to locate each one individually.
However, some CDs do not have long
enough gaps between tracks for this func-
tion to operate properly.
AUTOSPACE can solve this problem.
Pressing the
AUTOSPACE
button once
activates the function. The legend
AUTO SPACE
will appear in the display.
In this mode, once the Nuvista 3D CD has
reached the end of a track the
AUTO SPACE
graphic will begin to flash and the elapsed
time part of the display will change to
count down from four seconds to zero
before play of the next track begins.
When zero is reached the
AUTO SPACE
legend stops flashing and play continues at
the start of the next track.
Press
AUTOSPACE
again to cancel this
mode.
DISPLAY
The Nuvista 3D CD's display can be
switched off with the
DISPLAY
button on
the remote control
when a disc is playing
.
However, if the button is pressed without a
CD being loaded, or with a disc stopped,
track, index and time displays are briefly
replaced by the word DISPLAY OFF to
confirm this mode has been engaged,
but
the display remains lit until play is
selected
. Pushing the button a second time
briefly shows DISPLAY ON to confirm
that the function has been cancelled.
When in display-off mode, pressing any
button will cause the display to return
briefly to confirm the new status before
again switching off.
-- END --
