background image

Nu-Vista M

3

Instructions for Use.  Page 2 of 10  

SAFETY INFORMATION

IMPORTANT!

This unit is supplied in the U.K. with a mains lead fitted with a moulded 13 amp plug.

If, for any reason, you need to cut off this plug, please observe the following safety precautions.
Please dispose of the cut-off plug safely.  It must not be plugged into a mains power supply. 

The wires in the mains lead supplied with this appliance are coloured in accordance

with the following code:

Green and yellow..............Earth 
Blue...............................Neutral 
Brown................................Live

WARNING - This appliance must be earthed

As the colours of the wires of the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green-and-yellow must be connected to the terminal in the plug
which is marked with the letter E or coloured green or green-and-yellow, or by the earth 
symbol.

The wire which is coloured brown must be connected to the terminal which is marked with the
letter L or coloured red.

The wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black.

If connecting to a BS1363 plug, a 13 amp fuse must be used.

WARNING - Radio Frequency Interference (RFI)

This hi-fi product has been tested to ensure that its operation will not be adversely affected by
normal background levels of RFI. It is possible that if this product is subjected to abnormally
high levels of RFI the unit may be susceptible and not perform as expected.  In the unlikely
event of this happening on a regular basis, please contact Musical Fidelity's service department.
The unit has also been tested to ensure that it does not radiate excessive levels of RFI that could
affect other pieces of electronic or electrical equipment.
The electronics in modern hi-fi equipment is complex and hence may be damaged by lightning.
It is possible that during electrical storms the operation of some equipment may be adversely
affected.  For complete protection of your hi-fi system during such storms, mains plugs and aer-
ial leads should be disconnected.  

Always ensure that when disconnecting and re-connecting your hi-fi equipment the mains 
supply is switched off.

issue 1/26.10.2000

Summary of Contents for Nu-Vista M3











Reviews: