Musical Fidelity M6SRDAC, Instruction Manual

Page: 9 / 12

9
Remote Control Handset
The remote control shown below enables functions
from this and other units from the M3, M5 and M6
ranges to be operated from a convenient distance.
The remote control buttons are split into 3 distinct
areas.
The three rows of grey buttons at the bottom are used
to control the M6SRDAC and are detailed below.
The blue buttons control an amplifier such as
the M6si. Consult the amplifier manual for more
information.
The remaining grey buttons located in the upper
section control a CD player such as M6scd. Consult
the CD player manual for more information
As the handset uses an invisible infra-red light beam,
the front edge must be pointed directly towards the
receiver window at the front of the player, without
visual obstruction between them.
If the range of the remote control greatly decreases,
replace the batteries with new ones. Do not mix old
and new batteries – two are required, size AAA, LR03
or SUM-4.
Please dispose of used batteries in accordance to
local battery disposal regulations.
1 2 3
4 5 6
7 8 9
CHECK
0
CLEAR
PROGRAM
TIME
DISPLAY
VOLUME
CD USB PHONO TUNER
AUX1/HT AUX 2 BAL MUTE
COAX 1
COAX 2
OPTICAL 1
OPTICAL 2
STOP
PLAY
A/B
INTRO
REPEAT SHUFFLE
COAX 3 OPTICAL 3
USB
AMP CD
CD PLAYER
AMPLIFIER
SDAC
VOLUME
STBY
COAX 1
selects COAXIAL input 1
COAX 2
selects COAXIAL input 2
COAX 3 selects COAXIAL input 3
OPTICAL 1 selects OPTICAL input 1
OPTICAL 2
selects OPTICAL input 2
OPTICAL 3
selects OPTICAL input 3
USB selects USB input
STBY switch the M6SRDAC between
standby and operating mode
VOLUME ▼▲ controls main output of M6SRDAC in
variable mode or headhone level
when connected.