background image

A300 

Instructions for Use.  Page 3 of 9

GENERAL ADVICE

INSTALLATION PRECAUTIONS and USER INFORMATION

Your new A300 is designed and built to provide trouble-free performance but as with all elec-
tronic devices it is necessary to observe a few precautions.  

Heed all warnings on the back of the unit.

Only connect the A300 to a mains outlet of the voltage marked on the back of the unit.

Position the mains lead, speaker leads and signal interconnects where they are not likely
to walked on or trapped by items placed on them.

Do not use near water.

Do not place the unit near direct heat sources such as radiators or other equipment that
produces heat.

Do not place the unit where it can be subjected to direct sun-light.

Do not remove any covers or try to gain access to the inside.  The warranty is invalid if
the unit has been tampered with.  There are no user adjustments within.  Refer all service
work to an authorised Musical Fidelity agent.

Dust regularly with a soft duster or soft brush but be careful when using cleaning or 
polishing agents - they may harm the surface finish.

There are fuses in the A300.  In the unlikely event that one blows, take your unit to your
audio dealer.  Do NOT try to replace the fuse yourself or you will invalidate the warranty.

The remote control enables you to activate the main functions of the amplifier from the comfort
of your armchair.  The following should be noted when operating the amplifier using the remote
control.

- Point the remote control (transmitter) towards the I.R. lens (infra red) on the amplifier.
- Visual contact must exist between the transmitter and receiver.
- If the range of the remote control decreases dramatically, replace the 

batteries with new ones.  

Before Switching on the Stereo System

Please read carefully the instructions on the following pages.  The functional arrangement of
the controls makes the stereo system fairly easy to operate.  You should nevertheless study
these instructions to get the best from your equipment.

Important! Unauthorised opening of the equipment will invalidate any warranty claims

.

Note: To help your dealer identify your amplifier if after-sales service is required, please quote
the serial number located on the rear panel of the unit.

issue 3/13.07.2000

Summary of Contents for A300










Reviews: