49
1.
Retract the carrier plate.
To do so, push the carrier
plate gently into the printer
until automatic retraction
takes place.
2.
Open the service flap.
3.
Turn the waste ink tank
latch to open it.
4.
Remove the cap.
5.
Carefully remove the full
waste ink tank.
6.
Remove the cap from the
empty waste ink tank.
7.
Use this cap to close the full
waste ink tank.
8.
Insert the empty waste ink
tank into the printer.
9.
Attach the cap and turn to
close it.
Dispose of the ink at a local waste management
site in accordance with the statutory
regulations.
13.3
Replacing the waste ink absorber
Any ink that escapes is collected
by the waste ink absorber, to
avoid soiling the printer or the
work surface. You should check
the condition of the absorber at
regular intervals.
Replace if necessary.
Summary of Contents for P3B
Page 1: ...ACS labelling systems p b operating instructions As of June 2017 8902865309 ...
Page 53: ...53 Declaration of European Conformity ...
Page 54: ...54 Notes ...
Page 55: ...55 ...
