Murray EV3850x4NA, Instruction Book

Page: 10 / 24

OPERATION
10
F–041105C
EYE PROTECTION
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
WARNING: Debris thrown from
the Edger can result in foreign
objects being thrown into the
eyes, which can cause severe eye dam-
age. Always wear safety glasses or eye
shields when operating the Edger.
HOW TO USE THE INDEX LEVER
Bevel edging cuts a trench and reduces the
need to edge as often.
1. Stop the engine and disconnect the
spark plug wire from the spark plug.
2. Disengage the index lever from the
EDGING position and move to the
BEVEL position.
3. Reconnect the spark plug wire to the
spark plug.
4. Start the engine.
5. Move the depth control lever to the de-
sired height.
NOTE: For deep edging, first cut at shal-
low depths. Then, cut at greater depths
until the desired depth is obtained.
WARNING: While the engine is
running, never leave the Edger.
Before you adjust the wheels or
change the blade position, always dis-
engage the cutting blade and stop the
engine.
Figure 7
Index Lever