MAINTENANCE
31
F-050706L
INSTALLATION
1. Slide the
motion drive belt
between the
stack pulley
and the
belt guides
(Figure 34). Install the
motion drive belt
on the
top pulley of the
stack pulley
. Make sure the “V” side of the belt
is against the pulley.
2. Push the
motion drive belt
through the opening between the
steering plate and the engine plate.
3. Install the end of the
motion drive belt
around the
drive pulley
(Figure 31).
4. Tighten the
belt guides
at the
drive pulley
(Figure 32).
5. Put the belt around the
idler pulley
(Figure 31, Figure 36).
Assemble the
idler pulley
. Fasten the
idler pulley
with the hex
nut. Make sure the flat side of the belt is against the
idler pulley
.
Also, make sure the belt is not twisted.
6. Make sure the
motion drive belt
is inside all the
belt guides
(Figure 31, Figure 32).
7. Attach the
adjuster nut
and
shift link
to the
adjuster bracket
with a
hair pin
(Figure 33). See “How To Adjust The Shift
Lever”.
8. Attach the
steering shaft assembly
to the steering plate with
two screws (Figure 35).
9. Attach the
access panel
(Figure 35).
10. Check the routing of the motion drive belt. Make sure the
motion drive belt
is installed correctly on the
idler pulley
.
Make sure the
steering shaft assembly
in inside the
motion
drive belt
(Figure 36).
11. Install the battery.
12. Before you use the unit, check the adjustment of the clutch. See
the instructions “How To Check And Adjust The Clutch”.
13. Install the mower housing. See the instructions “How To Install
The Mower Housing”.
Figure 36
Motion Drive
Belt
Idler Pulley
Stack Pulley
Steering Shaft
Assembly
Summary of Contents for 425014x92B
Page 37: ...NOTES 37 F 050706L ...
Page 52: ...NOTES 52 F 050706L ...
Page 53: ...NOTES 53 F 050706L ...
Page 54: ...54 F 050706L ...