Introduction
User manual 9000-41011-0200000_hdb_en_20
11 / 92
1.3
General notes
1.3.1
Purpose of this document
Purpose of this docu-
ment
This document describes the use of the system Mico Pro. It instructs the tech-
nical staff of the machine manufacturer or machine operator on the assembly,
parameterization, electrical installation, commissioning as well as operation of
the system Mico Pro. It does not instruct on how to operate the machine into
which the system Mico Pro is integrated or will be integrated. For such infor-
mation refer to the operating manual of the machine.
1.3.2
Applicable documents
1.3.3
Trademarks
Trademarks of the following companies and institutions are used in this docu-
mentation:
1.3.4
Storage and transport
1.3.5
Environmentally friendly disposal
Comply with
country-specific
waste disposal regula-
tions.
Always dispose of scrap devices in compliance with the valid
country-specific regulations for waste disposal
(e.g., the European Waste Code 16 02 14).
Only qualified persons
may sort scrap materi-
als.
Proceed with caution when dismantling the device since you could injure
yourself.
Sort the separated components into the correct recycling line.
Document
Art.-No.
Location
Operating instruction
Mico Pro PS
9000-41190-0000105
Included in the scope of delivery or
http://shop.murrelektronik.com
Operating instruction
Mico Pro PM
9000-41190-0000000
Operating instruction
Mico Pro PD
9000-41000-0000212
Operating instruction
Mico Pro fix
9000-41011-0200000
Operating instruction
Mico Pro fix CL2
9000-41011-0400001
Operating instruction
Mico Pro flex
9000-41091-0101000
Murrelektronik
GmbH
Mico Pro
®
EPLAN
EPLAN Software & Service GmbH & Co. KG
