Automatic setting
Choose the basic flow rate for
automatic mode.
Choose the maximum temperature
setting for automatic mode.
Automatic flow rate and temperature.
Confirm
Change
Temporary setting
Choose the temporary forced flow
rate.
Choose the duration for this forced
flow rate in hours.
Flow rate maintained during a period ?
Confirm
Change
Manual setting
Choose the daytime air flow rate.
Choose the daytime temperature set-
ting.
Choose the night time temperature
setting.
Choose the night-time temperature
setting.
Day-time flow start.
Day-time end.
Manual flow rate and temperature.
Confirm
Change
Stop
--- MANUAL STOP ---
-TO RESTART PRESS BACK
-TO REPLACE FILTER, SEE MANUAL.
-AUTOMATIC RESTART IN :
3 H 00 M
Stop system?
Confirm
Change
3.2. Light indicators
When the device is switched on, the red and yellow lights are illuminated on the control panel. After a second, the red light
goes off, and the green light stays on.
3.2.1. Green light on, red light off:
The device is switched on.
3.2.2. Green and red lights on:
Change of filter needed (v. § 7)
3.2.3. Red light on, green light off:
Error or no filter (v. § 6.2)
3.3. Main screen
The first light indicates the day, date, and time. The system manages the change from daylight savings time and back automatically.
The first frame displays the state of the fan. means that the fan is running normally; means that the fan has
stopped.
The second frame displays a flow rate gauge and the operating mode.
Useful operating messages may appear below the frame or on full screen.
3.4. Tree structure
41
ENGLISH
