Murphy PowerView PV1200 Installation Manual Download Page 7

Page: 7 / 17

Section 78

00-02-1021

2018-07-16

5 -

Mounting the Unit

1. Place the back side of the display through the opening in the dash.

2. Use the four included screws from the mounting kit (78-00-1294) to attach the unit to the

bracket and torque to 10 inch-pounds.

Available Accessories for the PV1200

The following PV1200 accessories are available through Enovation Controls:

Part Number Description

Order Details

78700634

PV1200, Non-touch, Non-connected

Display

78700633

PV1200-T, Touch, Non-connected

Display

78090098

Programming Kit, PV780/PV1200

Accessories

78001294

Kit, Mounting Bracket, PV1200

78001055

Harness, Gray Connector, USB

78001056

Harness, Gray Connector, Flying Leads

78001057

Harness, Black Connector, Flying Leads

78001017

Harness, Black Connector, Development

78001018

Harness, Gray Connector, Development

78090069

Harness, PV750/PV1200 Conversion, Power/CAN

Service

Summary of Contents for PowerView PV1200


















Search results

Summary of Contents for PowerView PV1200

Reviews:

Related manuals for PowerView PV1200

Brands by name

Popular brands

Murphy PowerView PV1200, Installation Manual

Search results

Summary of Contents for PowerView PV1200

Reviews:

Related manuals for PowerView PV1200

Brands by name

Popular brands