![Murphy PowerView PV1000 Hardware Installation Manual Download Page 14](http://html.mh-extra.com/html/murphy/powerview-pv1000/powerview-pv1000_hardware-installation-manual_1857706014.webp)
Section 78
00-02-0599
07-19-07 -
10
-
Specifications
Electrical
Display
6.4” Color transmissive TFT LCD
Resolution
VGA, 640 x 480 pixels
Orientation Landscape
Backlighting
CCFL, 350 cd/m² (50,000 h lifetime) not replaceable
Processor
Sharp ARM9 LH7A404, 200 MHz
Philips ARM7 LPC2194 70 MHz
Flash Memory
16 Mbytes
RAM
32 Mbytes SDRAM
EEPROM 32
Kbytes
Operating Voltage
6 to 32 VDC, protected against
reverse polarity and load-dump
Power Consumption
10 W full backlight
22 W full backlight with heater (< -10º C)
CAN
4 CAN ports according to CAN specification 2.0B.
One port isolated according to NMEA 2000
RS-485
2 MODBUS Master ports at 38.4 Kbaud
Protocols
J1939, NMEA 2000, proprietary
Connection
4 Deutsch DT04-6P 6-pin connectors
Keyboard
8 Capacitive Touch Keys
Mechanical
Mounting Variants
Panel Mounting – Mounts with eight screws into the lip of the bezel.
Gimbal Mounting – Uses an articulating gimbal.
Dimensions
(W x H) 8.74 x 7.23 in
Panel Mount Depth – 0.605 in
Unit Depth – 3.265 in
Cutout for panel mounting
(W x H) 7.15 x 5.65 in
Case Material
High impact acrylic front case
Polycarbonate back case
Weight 2
lb
PHASE
OUT
/ DISCONTINUED
Check
Availability