manualshive.com logo in svg

Murphy PowerView PV-101-Cs, User Manual, Page: 17 / 47

Share
Download
Murphy PowerView PV-101-Cs User Manual Download Page 17

 

00-02-0796 

- 11 - 

08-26-11 

Main Menu Options 

This section describes the features listed on the 

Main menu

 

of the PowerView. These menu options display whenever 
you touch 

Menu

. The 

Arrow Keys

 allow you to scroll 

through items. 

Enter

 selects the highlighted option. 

Go to 1-Up Display/Go to 4-Up Display 

If you want to go to a different display, touch 

Enter

. The 

alternate view is displayed. 

DPF Regen* 

*Murphy products are compliant with requirements for U.S. EPA Emission 
Standard 

‒

 Tier 4 Interim and EU Emissions Standard 

‒

 Stage IIIB for 

diesel engines. These engines when fitted with a DPF (Diesel Particulate 
Filter) can self-clean the filter of particulates. This self-cleaning is known as 
Regeneration. PowerView offers 3-CAN options when DPF REGEN is 
enabled and available in the engine ECU. For more information, find 
document # 1110836 on the Murphy Web site (www.fwmurphy.com). 

Summary of Contents for PowerView PV-101-Cs
















































Reviews:

No comments