Fault Code Pop-Ups
A fault condition will trigger a pop-up dialog box on the screen describing the nature of the
fault. Corresponding red or amber fault lights on the corners of the unit are also activated to
indicate the severity of the fault. The following screens are examples of warning and shut-
down fault code pop-ups.
Warning
Shut-down
How to Hide/Show Faults
To hide the fault code pop-up being displayed on the screen, press the soft key on the right
next to the Hide icon. The pop-up will disappear; however the Warning or Stop icon will
remain on the screen to indicate there is still a fault. Pressing Hide does not clear the fault; it
only hides the pop-up message.
When a fault code has been hidden, a Recall icon will remain on the right side. When this soft
key is pressed, the fault code will again be displayed. When a pop-up message has been
activated, a pop-up message will be displayed until the alarm is acknowledged by pressing the
Hide key.
Warning
Recall View
Scrolling Through Multiple Messages
The title bar of the fault code pop-up may indicate multiple messages, as in Diagnostic
Message 1 of 3. Press the
Prev
and
Next
keys to scroll through the different messages.
Section 78
00-02-0870
2015-04-16
-
12 -
