Ver. 1.05
Ensure the socket assembly is seated fully into the screwgun per figure 1.
Fig1
Next put a bit into the adaptor socket. Pull back the
sleeve toward the motor, which allows the bit to be
inserted or withdrawn. Release the sleeve after
inserting bit, sleeve will return, bit will now be
locked into the adaptor. Wiggling the bit will result
in a small amount of movement, which is normal.
Fig 2 Fig 3
The clamping ring must be rotated until it is almost all the way unclamped (Fig 4) before inserting onto the adaptor.
Insert the Bit into the CH7390 and slide the adaptor into tool until seated and
lightly
tighten the clamp ring.
Fig 4
Fig 5
Fig 6
Do not over tighten the clamp ring. Light hand tighten only.
Summary of Contents for VISLIDER CH7390 Ultra Driver
Page 1: ......
Page 9: ...Ver 1 05 ...
