48
ARM AV LATENCY:
Choose the desired audio format that you will use for the selected AV latency test.
·
PCM - 48KHz - 2.0 Ch
·
Dolby Digital - 48KHz - 2.0 Ch
·
Dolby Digital Plus - 48KHz - 2.0 Ch
·
Dolby Digital Plus - 48KHz Dolby Atmos
·
Dolby MAT (PCM) - 48KHz - 2.Ch
·
Dolby MAT (PCM) - 48KHz - Dolby Atmos
·
Dolby MAT (TrueHD) - 48KHz - 2.0 Ch
·
Dolby MAT (TrueHD) - 48KHz - Dolby Atmos
·
MY STREAM FOR AV LATENCY 1
·
MY STREAM FOR AV LATENCY 2
With the Microphone and Visual sensor connected to the SEVEN-G-8K and placed appropriately (visual
probe centered on the display and microphone placed as close as possible to the speaker under test),
press the green OK button to initiate the Audio Video Latency Test (note this test runs for 120 seconds
and will restart each time you press the OK button).
Stream Start Adjust - This shows you in ms (milliseconds) the delay time you set
using the Audio Stream Start Adjust (Pg.41). Once you run the initial test (with
no adjustment) you can now use that data to delay the audio so it in sync with the
video. The goal for this test is to have ZERO delay, meaning that the audio and video
signals are arriving at the same time.
Audio Latency - This shows you (in milliseconds) the delay time of the audio being
Summary of Contents for MU-SEVEN-G-8K
Page 7: ...7 ...