-- 5 --
bm42d1ea
Accessories for the product can be found on page
20
.
3.1
Equipment
The wire feed unit is supplied with connection set (5m), instruction manual and
stickers.
4
TECHNICAL DATA
Transmatic 4C
Power supply
42 V 50--60 Hz
Power requirement
336 VA
Motor current
I
max
3.5 A
Settings data
Wire feed speed
Burnback time
1.5--22.0 m/min
0--0.7 s
Gun connection
EURO
Max. diameter wire bobbin
300 mm
Wire dimension
Fe
Ss
Al
Cored wire
0.6--1.6 mm
0.6--1.2 mm
1.0--1.6 mm
0.8--1.6 mm
Weight
13.2 kg
Dimensions (l x b x h)
569 x 259 x 355 mm
Shielding gas
max pressure
Gases for MIG/MAG welding
5 bar
Maximum permissible load at
60% duty cycle
100% duty cycle
365 A
280 A
Enclosure class
basic version
with sealed bobbin holder*
with MarathonPac
t
IP2X
IP23
IP23
* Accessories, see page 20.
Enclosure class
The
IP
code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Apparatus marked
IP2X
are intended for indoor use.
Enclosure class
The
IP
code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked
IP23
is designed for indoor and outdoor use.
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading. The duty cycle is valid for 40
˚
C.
GB
Summary of Contents for Transmatic 4C
