Murex Tradesmig 171, Instruction Manual

Page: 10 / 24

-- 10 --
T1725e
5 OPERATION
General safety regulations for the handling of the equipment can be found on
page 4. Read through before you start using the equipment!
WARNING!
Rotating parts can cause injury, take great care.
WARNING -- TIPPING RISK!
There is a risk of tipping while transportation and operation, if the welding machine leans
more than 10
o
. In that case appropriate securing has to be provided !
5.1 Connection and control devices
1 Mains supply switch with indicating lamp 6 Knob for spot welding -- ON/OFF and time
setting
2 Orange indicating lamp, overheating 7 Knob for wire speed setting
3 Welding voltage switch
T171: 8 steps
T201: 12 steps
T251: 12 steps 8 Digital instrument -- V/A,
(option,see page 21)
4 EURO -- connector for welding gun 9 Knob for burn--back time setting.
In T251 located in wire feeder compartment,
in T171/T201 located on control board.
5 Connection for return cable (--)