Murex Tradesarc 200, Instruction Manual

Page: 16 / 28

-- 16 --
bh37d2em
14 ORDERING SPARE PARTS
Repair and electrical work should be performed by an authorized serviceman.
Use only original spare and wear parts.
Tradesarc 200 is designed and tested in accordance with the international and Europe-
an standards IEC/EN 60974--1 and EN 60974--10. It is the obligation of the service unit
which has carried out the service or repair work to make sure that the product still
conforms to the said standard.
15 DISMANTLING AND SCRAPPING
Welding equipment primarily consists of steel, plastic and non--ferrous metals, and must
be handled according to local environmental regulations.
Coolant must also be handled according to local environmental regulations.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!