Murex Tradesarc 200, Instruction Manual

Page: 5 / 28

-- 5 --
bh37d1em
3.1 Equipment
Tradesarc 200 is supplied with a 3 m welding cable, return cable, 3 m mains cable
and an instruction manual for power source and control panel.
3.2 Control panel
Welding process parameters are controlled via the control panel, see page 10.
4 TECHNICAL DATA
Tradesarc 200
Mains voltage 230 V, 1
μ
50/60 Hz
Primary current
I
max
TIG
I
max
MMA
24 A
25 A
Mains supply Z
max
0.31 ohm
No--load power demand when in the
energy--saving mode, 6.5 min. after welding
30 W
Voltage/current range, MMA 4 A /20 V -- 170 A /26.8 V
Voltage/current range TIG 3 -- 220 A
Permissible load at MMA
25% duty cycle
60% duty cycle
100% duty cycle
170 A / 26.8 V
130 A / 25.2 V
110 A / 24.4 V
Permissible load at TIG
20% duty cycle
60% duty cycle
100% duty cycle
220 A / 18.8 V
150 A / 16.0 V
110 A / 14.4 V
Power factor at maximum current
TIG
MMA
0.99
0.99
Efficiency at maximum current
TIG
MMA
75%
81%
Open--circuit voltage MMA / TIG
without VRD
with VRD
55 -- 60 V
< 35 V
Operating temperature --10 ˚ C -- +40 ˚ C
Transportation temperature --20 ˚ C -- +55 ˚ C
Constant A--weighted sound pressure < 70 dB
Dimensions, l x b x h 418 x 188 x 208 mm
Weight 8.3 kg
Enclosure class IP 23
Application class
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading. The duty cycle is valid for 40 ˚ C.
The duty cycle is valid for 40 ˚ C.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
GB