NOTES:
1. Dimensions shown for ADA compliant installation. For Child ADA 2010 compliant parallel approach installation, decrease
height of (*) dimensions by 2-3/4".
2. Provide clear floor space as required. Adjust vertical dimensions as required to comply with federal, state, and local codes.
ROUGHING-IN AND DIMENSIONAL DRAWING
Prior to roughing consult with local, state, and federal codes for proper mounting height.
A172UBL-VR SERIES REFRIGERATED BI-LEVEL WALL MOUNTED DRINKING FOUNTAIN
Note: there are no mounting changes to be made for -SO models.
A172VR
Page 2 of 10
Revised:
12/22/17
7020-917-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
1-1/4" [32]
P-TRAP BY
OTHERS
1
3
8
"
[35]
6"
[152]
12"
[305]
*33"
[838]
6"
[152]
21
7
8
"
[556]
35
1
4
"
[895]
C
18
5
8
"
[473]
D
19
3
8
"
[492]
6"
[152]
13
3
8
"
[340]
7
7
8
"
[200]
4
1
4
"
[108]
2
1
4
"
[57]
7
7
8
"
[200]
6
5
8
"
[168]
6
5
8
"
[168]
B
A
E
E
7
1
4
"
[184]
2
3
4
"
[70]
18
1
2
"
[470]
A. 3/8" NCT Supply Inlet
B. Waste Outlet for 1-1/4" P-Trap, by others
C. Ø3/8" Hanger Bracket punching, 3 places
for Anchoring Hardware, by others
D. Ø1/4" punching, 2 places for Anchoring
Hardware, by others
E. Caulk for Outdoor Units (see page 5)
F. Electrical Service Rough(If Bottle Filler is
being used)
General Notes:
1. All dimensions are in inches [MM]
2. Allow 4 inches [102 MM] minimum clearance per side for
ventilation
*3. Dimensions shown are for recommended adult height. Adjust
vertical dimensions as necessary to comply with Federal,
State, & Local Codes
4. Stop Valve, P-Trap & Electrical Outlet not supplied
5. Important: Units must be attached to wall with appropriate wall
Anchor Screws
E
F
5
1
4
"
[133]
16
5
8
"
[422]
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
DRINKING FOUNTAIN
