PRIOR TO INSTALLATION:
Important: some options may slightly alter installation. To ensure proper installation review the manual
thoroughly and verify rough-ins before beginning work. File this manual with the owner or maintenance
personnel upon completion of installation.
—
Fixture mounting requirements: industry standard wall construction, adequate to support the fixture and
installer provided wall anchors sufficient to secure the fixture.
—
Inspect fixture and all parts from damages.
IMPORTANT:
1. Waste P-Trap, Water Supply Service Angle Stop Valve to be supplied by others in accordance with local
codes. A metallic p-trap (by others) must be used for the drain connection.
2. Water supply is 3/8” Outer Diameter copper tube. Waste is 1-1/4” Outer Diameter.
3. Completely flush supply lines of all foreign debris before connecting to fixture. Drinking fountain is
designed to not cause problems with taste, odor, color, or sediment. Optional water filter (WF1) is
available should any of these problems arise from the water supply.
4. Do NOT solder tubes inserted into the coupler as damage to the o-ring may result.
5. All burrs must be removed from outside of cut tubes before inserting into coupler or other components.
6. Warranty is voided if installation is not made following current Acorn Engineering installation instructions
and if components are assembled to the fixture that is not approved by Acorn Engineering.
7. Fixture operates within water pressure range of 20 to 105 psig. Acorn Engineering will not warranty
fixtures damaged when connected to supply lines with flow pressure lower than 20 psig or higher than
105 psig. A pressure regulator must be furnished by others on supply line if inlet pressure is greater than
105 psig.
8. Per UPC 609.10-
All building water supply systems in which quick acting valves are installed shall be
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
DRINKING FOUNTAINS
A172FGVR
Page 3 of 10
New:
08/01/16
7020-930-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
18
1
2
"
*33
1
2
"
1
3
8
"
10
5
8
"
TAILPIECE
*22
1
4
"
2
1
4
"
*25"
14
1
4
"
5"
19
3
8
"
7
7
8
"
6
5
8
"
AIR FLOW
*16"
18
5
8
"
8
1
4
"
37
1
8
"
D
E
C
B
A
4
1
4
"
7
1
2
"
14
1
4
"
A172400FGVR Wall Mounted Drinking Fountain- Reverse Bi-Level
