Muratec F-114 Series Service Manual Download

Page: 103 / 162

Adjustment and Troubleshooting

Service Manual

4-43

2) Defective MF DIAL

Description: The MF DIAL is not functioning.

1. Check that the

telephone line cord supplied

with the set is connected to

TEL LINE correctly.

If the telephone cord is OK but
there is no dial tone, try plugging
a normal telephone into the wall
socket. I this is OK then replace
the Main B'd.

2. Listen for a CLICK sound

when the keKEY is pressed.

If you cannot hear the OHD
CLICK sound, the OPE Ass'y may
be defective. Replace the
OPE Ass'y.

3. Check that the

SPEAKER is connected correctly.

Use Tech mode / Modem Test to
check that the speaker and
amplifier are working. Replace
Main B'd in sequence.

Notes:

Product supports MF

DIAL type only.

All manuals and user guides at all-guides.com

Summary of Contents for F-114 Series



































































































































































Search results

Summary of Contents for F-114 Series

Reviews:

Related manuals for F-114 Series

Brands by name

Popular brands

Muratec F-114 Series, Service Manual

Search results

Summary of Contents for F-114 Series

Reviews:

Related manuals for F-114 Series

Brands by name

Popular brands