N1-2657: TypeZF Mother Board Quick-Start Guide
4 / 4
3.2. Configurations of the Mother board
Table 4 Mother Board configuration
#
Description
Related Pins
To do
1
UART connection
EN_ADBUS0
EN_ADBUS1
Both pins are tied by jumpers.
2
Select internal/external
Power Supply
3V3
EXT
When using internal 3.0V supply:
- 3V3-EXT and MOD-VBAT are tied by jumpers.
When using external power supply:
- 3V3-EXT is open.
- External power is supplied to EXT pin.
- MOD-VBAT is still tied.
3
Current Measurement
(Internally)
EN_MEAS-
Both pins are tied by jumper.
4
OTP write
SEL_VPP
VPP_EXT
When using internal VPP source:
- SEL_VPP is set to “INT”
When using external VPP source:
- SEL_VPP is set to “EXT”
- External 6.8V is supplied to VPP_EXT pin
4. Quick Start
This chapter shows how to quickly set up the environment of Mother Board.
1. Connect the Daughter Board to the Mother Board.
2. Connect J-Link adapter to the Mother Board. (Only if J-Link debugging is used)
3. Connect the Mother Board and PC by USB cable.
About Software and other things, please refer following document by Dialog.
“DA14580_SDK_v_2.0.4_ES4_User_Guide.pdf”