Murata MEMS Evaluation
Unit User Manual
Murata Electronics Oy
Subject to changes
31/34
www.murata.com
Doc.Nr. 82175700
Rev.D
8.2 16-pin connector for external board
On the MEMS evaluation board there is also an extra 16-pin connector for external boards. This
connector has the same pins as the chip carrier connector, and additionally it also has the power
supply inputs from the base board. This makes it possible to power the evaluation board through
the external board if necessary.
Table 2. External board connector pin descriptions
PIN
Description
1
V+ external voltage in/out
2
DVDD, Digital power
3
GND, Digital GND
4
E6, Extra 6
5
INT / E5, Interrupt or extra 5
6
Reset / E4, reset or extra 4
7
E3, extra 3
8
E2, extra 2
9
CSB2 / E1, extra 1 or CSB2
10
SCK / SCL
11
MOSI / SDA
12
MISO / SDA
13
CSB
14
PD / extra 7, Powerdown or extra 7
15
AVDD, Analog power
16
GND
