www.RFM.com
© 2010-2012 by RF Monolithics, Inc.
Technical s1.678.684.2000
E-mail:
Page 63 of 80
DNT90 Integration Guide - 08/09/12
Click on
Connect
to open the
Select Comm Port Settings
dialog box, as shown in Figure 8.6.2. If
necessary, set the baud rate to 9600 bps. Set the
CommPort
to match the serial port connected to the
Base, either the hardware port or the USB virtual serial port. Then click
OK
to activate the serial
connection.
Figure 8.6.2
At this point the utility program will collect data from the Base, filling in the
Local Radio
column as shown
in Figure 8.6.3. Next, power-up the Remote using a wall-plug power supply. The Remote will transmit a
“heartbeat” message on power up as shown in the
Status Window
. Click on the drop-down box at the top
of the
Radio 1
column and load the
MAC Address
for the Remote from the heartbeat message. Next
press the
Start
button using the default 1 second
Refresh Delay
.
Figure 8.6.3
