© Munters AB, 2018
43
11.3.2
D
ISABLING ALARMS
•
Select
ALARM > Disabled Alarms
View disabled alarms and re-enable these alarms.
NOTE:
: Alarms are disabled until 12:00 PM the following day.
•
Scroll right to view message.
•
Press +/- to re-enable the alarm and then press ENTER.
NOTE:
Alarms that are re-enabled are cleared from the list.
11.3.3
D
EFINING THE MESSAGE DELAY
•
Select
ALARM > Options
.
This menu defines the waiting times between an alarm event and its reporting.
•
Call-Out (seconds): Define the waiting time before Communicator begins the reporting
sequence.
•
Between Users (seconds): Define the waiting time before contacting the next user within the
address book.
11.3.4
D
EFINING THE MESSAGE REPEAT PARAMETER
•
Select
ALARM > Options.
By default, when an alarm is sent, it must be acknowledged by one of the contacts. If there is no
acknowledgment, Communicator resends the alarm (refer to Acknowledging a message, page 32).
This menu defines the waiting time before Communicator reinitiates the reporting (VOICE, PAGER, TEXT).
NOTE:
Enter 0 to disable this option.
DISABLE ALARMS
DISABLE ALARMS
HOUSE DISABLE CODE
MESSAGE
23
YES
185
25
YES
155
OPTIONS
==MESSAGE DELAY===
Call Out (s)
60
Between Users (s)
60
TEXT
==MESSAGE REPEAT==
Voice
20
Pager
35
Text
35
===INTERNAL ALARM===
Delay(s)
60
Reminder (m)
60
Power Resto.Msg
NO
