Important user information
Intended use of equipment
Munters dehumidi
fi
ers are intended to be used for the
dehumidi
fi
cation of air. All other uses of the equipment,
or use which is contrary to the instructions given in
this manual, can cause personal injury and/or machine
damage.
Warranty and obligations
The warranty period is valid from the date the
equipment left our factory, unless otherwise advised
in writing. The warranty is limited to a free exchange
including free freight of the faulty unit or components,
which have failed as a result of faulty quality or defects in
manufacture. Munters guarantees that the unit supplied
has undergone thorough testing to ensure that it meets
the speci
fi
cations given here. All warranty claims must
include proof that the fault has occurred within the
warranty period and that the unit has been used in
accordance with the speci
fi
cations. All claims must
specify the unit type and manufacturing number. This
information is stamped on the unit identi
fi
cation plate,
see the section Marking.
It is a condition of the warranty that the unit for the full
warranty period is serviced and maintained by a quali
fi
ed
Munters engineer or Munters approved engineer.
Access to speci
fi
c and calibrated test equipment is
necessary. The service and maintenance must be
documented for the warranty to be valid.
Always contact Munters for service or repair. Operating
faults can occur if the unit is maintained insuf
fi
ciently or
incorrectly.
Note!
The contents of this publication can be changed without
prior notice. This publication contains information
which is protected by copyright laws. No part of this
publication may be reproduced, stored in a system for
information retrieval or be transmitted in any form, in
any manner without Munters’ written consent. Please
send any comments regarding the contents of this
publication to:
Munters Europe AB
Technical Documentation
P O Box 1150
SE - 164 26 KISTA Sweden
e-mail: [email protected]
Safety
In this publication hazardous activities are indicated and
preceded by the common hazard symbol.
WARNING!
is used in this publication to indicate a possible danger that
could lead to personal injury. An instruction is normally given,
followed by a short explanation, plus the possible effects if
the instruction is not followed.
CAUTION!
is used in this publication to indicate a possible danger that
could lead to damage to the machine or other equipment
and/or cause environmental damage. An instruction
is normally given, followed by a short explanation, plus
the possible environmental effect if the instruction is not
followed.
NOTE!
Used to accentuate supplementary information
that is required for problem-free use or optimal use of the
unit.
ii
Important user information
190TEN-1071-C1304