14
|
© Munters AB, 2020
fig.10
WARNING
The fans must be installed to carry out extraction of the air present in the area, and must not operate
under positive pressure. It is also permissible to install the fan in a horizontal position.
5.2 Installing Series EM fans
fig.11
If the fan is fixed directly to a metal structure, M8 bolts type
8.8 must be used, screwing them into the threaded inserts
provided for the purpose on the bodywork (two per side).
fig.12
If the fan is installed in a masonry structure, an iron outer
frame must be constructed (not supplied with the fan), with
a 60 mm L-shaped profile at least 5 mm thick, with
suitably-sized clamps.
When the outer frame is properly built-in, i.e. perfectly level
and upright, insert the fan, screwing four M8 bolts type 8.8
(not supplied with the fan) into the threaded inserts
provided on the sides of the bodywork, two per side.
