© Munters AB, 2013
26
8.3 Replacement of propeller
If propeller damaging occurs, it is necessary to substitute the whole propeller because of the difficulty to balance
it, in the field.
fig. 9
1. Unscrew q.ty 4 M06 screws (ref. 1) and remove
rear safety mesh guard.
fig. 10
2. Unscrew q.ty 4 M08 screws and remove
corresponding q.ty 4 Ø08 serrated washers (ref.
2) on the propeller hub.
fig. 11
3. Remove the propeller.
8.4 Replacement of motor
fig. 12
1. Follow the procedure illustrated to remove the
propeller and then turn the fan upsdie-down. In
this way the motor will not fall down when you will
remove the bolts & screws as indicated at point 2.
Maintenance
Chapter8
