© Munters AB, 2013
6
The safety of fans is assured by Munters in compliance with the safety requirements indicated by the CE label.
Safe functioning is assured only when the installation procedures and the instructions for use have been carefully
followed.The following points must be stressed:
•
proper transport procedure must be followed;
•
do not remove the safety meshes;
•
all the fans installed at a height lower than 2.7 m from ground level must be equipped by extra safety
kits, which can be ordered and should be mounted on the fan side;
•
inform the maintenance operator on maintenance procedure; create an efficient ground wiring; adopt
disconnecting and safety automatic devices against overloadings and short circuits.
Safety aspects
2.
The fan must only be used if it is in perfect operating condition, by personnel, aged
more than 14 years who are perfectly aware of the safety measures and possible
hazards, and in strict compliance with the instructions given in this manual.
Warning
Do not operate the fan without having it firmly fixed to the structure or without
complying with the safety regulations for the electrical connection.
Do not install the fan in places where there might be explosion hazards as
described by C.E.I.64-2 rules and do not handle any material which might
produce explosive powders, as stressed in the same rules.
If used as an air extractor, the emission of polluting gases into the atmosphere
must be within the limits determined by local authorities.
fans must be installed at a safe height to leave the way free for the transit of
transport and operators.
Warning
