Munters EC52D, Manual For Use And Maintenance

Page: 15 / 40

15 | © Munters AB, 2019
•
incorrect installation differing from instructions given in this manual;
•
supply from an electrical network with characteristics different from that specified in
the wiring diagram;
•
total or partial failure to observe instructions;
•
insufficient maintenance;
•
use of non-original spare parts;
•
use of lubricants with characteristics different from those specified in the technical
documentation attached to the manual;
•
use by minors;
•
use under the influence of drugs, alcohol, etc.
WARNING Use of the fan other than as described in the user manual or outside the
operational limits laid down by the manufacturer is considered IMPROPER USE. In
the event of IMPROPER USE the manufacturer declines all liability in relation to any
damage that may be caused to persons or property, and any kind of warranty will be
considered invalidated.
Use of non-original spare parts
Original spare parts ensure the reliability and safety of the operation of the fan: in the event of
maintenance/replacement, consult the spare parts list, the list of parts and components used
and the relevant technical documentation attached to this manual.
WARNING In the event of replacement of safety devices, it is essential to maintain
the safety and operational characteristics of the original device, preferring
replacement with an identical component.
Insufficient maintenance
A
correct normal maintenance is one that maintains the original integrity or restores the fan’s
efficiency, while at the same time limiting normal deterioration resulting from use.
Special maintenance work can also prolong the usable life of the machine and/or, secondarily,
can improve its efficiency, reliability, productivity and ease of maintenance and inspection.
Unauthorized modifications or tampering
No operation is permitted which is aimed at making modifications to the fan and the safety
devices fitted to it; similarly, it is not possible to alter its operational and performance
characteristics.
WARNING Interference with the command and control circuits is prohibited: such
operations could cause damage to the equipment and serious danger to the
operator.
NOTE Modifications made to the fan which do not come into the categories of normal
and special maintenance, or which alter its operational and performance
characteristics, invalidate the machine’s compliance with the requirements of the
applicable directives, as attested by the manufacturer with the EC declaration of conformity:
it is up to the person responsible for the modification to resubmit the machine to the
assessment conformity procedures specified in the applicable directives.