31
|
© Munters AB, 2018
The function is controlled by a red mushroom type button on a yellow background, provided
with mechanical locking and release by turning. Operating it causes the instantaneous
interruption of the power supply to the electric motor which makes the rotor turn (uncontrolled
shutdown category 0 according to IEC EN 60204-1).
Resetting after stopping
1. Resetting after normal stopping
After normal stopping the operating cycle must be reset by following the procedure
described in section 6.1.
2. Resetting after emergency stop
After an emergency stop, the operating cycle must be reset by following the
procedure described below:
•
reset the actuator by which the emergency stop command was given (by turning
the relative mushroom button);
•
for an exact reset sequence, refer to the instructions given in section 6.2.
