25
|
© Munters AB, 2020
Insert and fix qty. 4 M6 hex nuts
with flange (
ref. 38
) over the bolts.
Tighten
the
nuts
by
using
pneumatic
screw-driver
(
ref.
3/Assembling tools
).
Place the waterproof distance piece
(
ref. 42
) on the axle and then place
the axle on a support.
Place the v-belt (
ref. 25
) on the
central pulley.
Before assembling the propeller
make sure that the hub is oriented
as shown in the picture. The 4
highlighted holes are used to fix the
propeller to the hub.
