7
© Munters Corporation, May 2020
QM1108r0
Installation Instructions
Chapter 2
Step 3
The Inlet Guard is the one with the large inner hole to go over the motor. With the eyelets on the guard
pointing into the fan slip the eyelets over the shaft of the Eye Bolts and fasten using (4) Nuts [B].
See Figure 3.
Figure 3
Inlet Guard
Nut [B]
Shaft of Eye Bolt
2.2 Optional Guard Installation
Figure 4
Step 4
The Outlet Guard is the one with the small inner hole. With the eyelets on the guard pointing toward the fan,
align the eyelets with the holes in orifice on the outside of the fasten using (4) Bolts [A] and Nuts [B]. The
head of the bolt goes on the inside of the orifice and the nut goes on the outside.
See Figure 4.
Outlet Guard
Nut [B]
Bolt [A]
Nut [B]
Bolt [A]