FORM: QM1110M
Rev. 1, November 2013
Page 10 of 12
Munters Corporation
4215 Legion Dr. Mason, MI 48854-1036 USA
Ph: +1 517 676-7070 Fax: +1 517 676-7078
www.munters.us
Step 10
On each end of the run of BI28/BI48 inlets run a cable
through the pulleys to the winch or actuator on one end
and to the weights or return spring on the other end.
See Figure 7A, 7B and 8.
Step 11
With the winch or actuator at its fully closed position, check and readjust
each BI28/BI48 door tightly closed. Use winch or actuator to open and close
inlets a few times to make sure the doors open and close smoothly.
Figure 8
To Weights or
Return Spring
Winch or Acruator