Munro LP 3 HP, Owner'S Manual

Page: 8 / 12

GOVERNING LAW: It is understood and agreed that these Terms and Conditions of Sale shall be interpreted under and pursuant to the laws of the State of Colorado; you agree that any action at
law or suit which is related to any contact of sale brought against us shall be filed in a federal or state court located in the State of Colorado.
LIMITED WARRANTY: Munro Companies Inc. (The Company) hereby warrants, in accordance with and subject to the provisions herein contained, your unit against defects in materials and
workmanship under normal use and service when properly connected for a period of 12 months or 1000 hours of operation (which ever occurs first), from the date of purchase. In the event of a
breakdown or failure of your unit or part thereof, within the period of 12 months or 1000 hours of operation which prevents normal function and The Company deems that the breakdown or fail-
ure is a result of defects in manufacturing or workmanship, Munro will repair the breakdown or failure or replace any defective part or the whole unit at the Company’s discretion. Freight charges
will be the User’s responsibility.
Further, we warrant to our immediate customer and to the ultimate consumer that products of our manufacture will be free of defects in material and workmanship under normal use and service
for the following time periods, when installed and maintained in accordance with our instructions. Pump Products: One (1) year from date of installation or (18) eighteen months from date of
shipment, whichever occurs first. As used herein, “the ultimate consumer” is defined as the purchaser who first uses the product after its initial installation or, in the case of product designed for
nonpermanent installation, the first owner who used the product. It is the purchaser’s or any sub-vendee’s obligation to make known to the ultimate consumer the terms and conditions of this
warranty. This warranty gives you specific legal rights, and there may also be other rights which vary from state to state. In the event the product is covered by the Federal Consumer Product
Warranties Law (1) the duration of any implied warranties associated with the product by virtue of said law is limited to the same duration as stated herein, (2) this warranty is a LIMITED
WARRANTY, and (3) no claims of any nature whatsoever shall be made against us, until the ultimate consumer, his successor, or assigns, notifies us in writing of the defect, and delivers the
product and/or defective part(s) freight prepaid to our factory or nearest authorized service station. Some states do not allow limitation on how long an implied warranty lasts, so the above
limitation may not apply. THE SOLE AND EXCLUSIVE REMEDY FOR BREACH OF ANY AND ALL WARRANTIES WITH RESPECT TO ANY PRODUCT SHALL BE TO REPLACE OR REPAIR AT OUR
ELECTION, F.O.B. POINT OF MANUFACTURE OR AUTHORIZED REPAIR STATION, SUCH PRODUCTS AND/OR PARTS AS PROVEN DEFECTIVE. THERE SHALL BE NO FURTHER
LIABILITY, WHETHER BASED ON WARRANTY, NEGLIGENCE OR OTHERWISE. Unless expressly stated otherwise, guarantees in the nature of performance specifications furnished in addition to
the foregoing material and workmanship warranties on product manufactured by us, if any, are subject to laboratory tests corrected for field performance. Any additional guarantees, in the nature
of performance specifications must be in writing and such writing must be signed by our authorized representative. Due to inaccuracies in field testing if a conflict arises between the results of
field testing conducted by or for user, and laboratory tests corrected for field performance, the latter shall control. Components or accessories supplied by us but manufactured by others are
warranted only to the extent of and by the terms and conditions of the original manufacturer’s warranty. RECOMMENDATIONS FOR SPECIAL APPLICATIONS OR THOSE RESULTING FROM
SYSTEMS ANALYZES AND EVALUATIONS WE CONDUCT WILL BE BASED ON OUR BEST AVAILABLE EXPERIENCE AND PUBLISHED INDUSTRY INFORMATION. SUCH RECOMMENDA-
TIONS DO NOT CONSTITUTE A WARRANTY OF SATISFACTORY PERFORMANCE AND NO SUCH WARRANTY IS GIVEN.
This warranty shall not apply when damage is caused by (a) improper installation, mechanical or electrical, (b) improper power (i.e., voltage, etc.) (c) lightning (d) sand or other abrasive material
(e) scale or corrosion build-up due to excessive chemical content (f) This warranty does not extend to or cover the unit or any part of it which, in the opinion of the Company, has worn by
reasonable wear and tear, abraded or corroded by fluid pumped, run in a dry condition, operated at high temperatures or outside the technical specifications of the unit. Any modification of the
original equipment will also void the warranty. We will not be responsible for loss, damage or labor cost due to interruption of service caused by defective parts. Neither will we accept charges
incurred by others without our prior written approval.
This warranty is void if our inspection reveals the product was used in a manner inconsistent with normal industry practice and/or our specific recommendations. The purchaser is responsible for
communication of all necessary information regarding the application and use of the product.
UNDER NO CIRCUMSTANCES WILL WE BE RESPONSIBLE FOR ANY OTHER DIRECT OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST INCOME,
LABOR CHARGES, DELAYS IN PRODUCTION, IDLE PRODUCTION, WHICH DAMAGES ARE CAUSED BY ANY DEFECTS IN MATERIAL AND/OR WORKMANSHIP AND/OR DAMAGE OR DELAYS
IN SHIPMENT. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
No rights extended under this warranty shall be assigned to any other person, whether by operation of law or otherwise, without our prior written approval. If any litigation is commenced
between the parties hereto for the enforcement of any rights hereunder, the successful party in subject litigation shall be entitled to receive from the unsuccessful party all costs incurred in
connection therewith, including a reasonable amount for attorney’s fees.
YOUR ACCEPTANCE OF ANY GOODS SUPPLIED BY US, OR ON OUR BEHALF, SHALL, WITHOUT LIMITATION CONSTITUTE ACCEPTANCE OF ALL TERMS, AND CONDITIONS STATED
ABOVE.
PARTS BREAKDOWN
TERMS & CONDITIONS
LP3005
ITEM SINGLE PHASE HORSEPOWER 5
MODEL NO. LP3005B
DESCRIPTION PART NO.
1 Motor, NEMAJ - 1 Phase MLP131641 1
▲
2
3
▲
4
5
6
Slinger, Washer
Shaft Sleeve
Mount Ring
Hex HD Cap Screws 3/8” x 3/4”
Gasket, Square Cut
Seal, Rotary W/Spring
Retaining Clip
MLPG005
MLP60010
MLP3300
MLPB909
MLPG003
PACSC185
MLP30001
1
1
1
4
1
1
1
7
8
9
▲
10
▲
Impeller, Brass “B” model
Flat Impeller Washer
Beveled Impeller Washer
Impeller Bolt - Hex HD Cap Screw 1/4” x 1”
Diffuser
Diffuser Bolt - Hex HD Cap Screws 5/16” x 1 1/2”
MLP3405
MLP3WASH
MLP3CONE
MLPB906
MLP3200
MLPB910
1
1
1
1
1
2
11
12
▲
13
▲
Gasket, Diffuser
Pump Body
1/4” Drain Valve
3/4” Priming Plug
1/4” Sensor Port Plug
MLPG004
MLP3100
MLP913
•
•
1
1
2
2
1
(•) Standard hardware Item ---- (
▲
) Not Shown ---- (*)3 Phase Only
Page 7