Wall mounted FCU DC
ŝ
Timing ON/OFF
φ
When adjusting timing ON state or only the timing ON function
has been set, the “Timing ON” will be displayed; when
adjusting timing OFF state or only the timing OFF function has
been set, the “Timing OFF” will be displayed.
Ş
Lock
φ
Press MODE and TIMER button for 5s simultaneously
,
lock
icon will be displayed;Press buttons again,the icon disappears.
ş
Temperature
φ
Display the set temperature. Adjust temperature via “
”.
No display in this area if the unit is on FAN mode.
Š
Follow Me:
Under the cool, heat, auto mode operation state, press the
right of “DRY E•A•H
ј
FOLLOW ME” button, the follow me
icon will be displayed, and press again the icon will be
disappeared.
š
Fan speed
φ
Press FAN SPEED to display the current wind speed.
AUTO, LOW, MED and HIGH can be selected. The default
state is high fan speed for the unit without medium fan speed.
CAUTION
All the above icons are listed for instruction, and the relative
items will be dispalyed when operation. And all the icons will be
displayed when the remote controller is electrified for the first
time or reset.
1. Install 2 pieces of 7# alkaline batteries.
2. Slide the cover to install batteries and make sure to place them
in right pole.
AUTO operation
AUTO
FAN SPEED
FAN SPEED
/LJKWLQJ
Running
Lighting
TEMP
SET
MODE
ON/OFF
Press MODE to select AUTO.
Adjust temp via and . Generally the range is 17
ć
~30
ć
.
Press ON/OFF and running indicator light on indoor unit is
lightened. Air conditioner will work on AUTO mode and fan
speed is AUTO, the display screen on remote controller will
display “AUTO”, then the fan speed is adjustable. And press
ON/OFF again, the air conditioner will be stopped.
1.
2.
Fig.5-1
3.
2.4.1. Install and replace batteries
2.4.2. Auto operation (Normal)
AUTO
COOL
DRY
HEAT
FAN
TIMER OFF
TIMER ON
FOLLOW ME
TEMP
FAN SPEED
FAN SPEED
FOLLOW ME
FOLLOW ME
SLEEP
MODE
ON/OFF
Ŝ
Lock
ş
Timer ON/OFF
Ş
Ś
Running
mode
ŝ
Temperature
Š
Fan speed
š
Transmitting
display
Follow Me
ś
Ś
Transmitting display: The icon will flash once when the signal is
sent by remote controller.
ś
ON/FF: Icon is displayed when the remote controller is turned
on, or vice versa.
Ĺ
Running mode: Press MODE to display current running mode. AUTO,
COOL, DRY, HEAT and FAN can be selected.
Fig.4-1
2.3. Names of indicators and their
functions
2.4. Operation instructions
FAN SPEED
FAN SPEED
/LJKWLQJ
Running
Lighting
DRY
FAN SPEED
FAN SPEED
/LJKWLQJ
Running
Lighting
FAN
FAN SPEED
FAN SPEED
/LJKWLQJ
Running
Lighting
COOL
HEAT
DRY/FAN/COOL/HEAT OPERATION
TEMP
SET
MODE
FAN
SPEED
ON/OFF
4
DRY
FAN
COOL
HEAT
FAN SPEED
FAN SPEED
/LJKWLQJ
Lighting
Running Electric heating
Press MODE to select COOL, DRY, HEAT or FAN.
Adjust temp via and . Generally the range is
17
ć
~30
ć
.
Press FAN SPEED to select AUTO, LOW, MED or HIGH.
Press ON/OFF and running indicator light on indoor unit
is lightened. Air conditioner will work on the set mode.
Stop operation via ON/OFF.
1.
2.
3.
4.
Fig.5-2
CAUTION
“FAN” operation can not set the temperature, when select this
operation only can do 1,3,4 steps.
“DRY” operation can not set the fan speed, when selsect this
operation only can do 1,2,4 steps.
Dry function
Function instruction
Stop operation
DRY
Lighting
DRY E
•A•H FOLLOW ME
This air conditioner has dry function,
close the unit under the cool and dry mode,
the air conditioner will operate the dry
function automatically, then the icon will be
lightened. For cool-only model, the air
conditioner will Low operate with fan mode
for 10 mins and then close the unit automati-
cally.
If you want to stop the dry function, can presss the left of “DRY
E•A•H
ј
FOLLOW ME” under the function is operating, then
can stop the function, and the icon will be off.
Fig.5-3
2.4.3. Dry / Fan / Cool / Heat operation
2.4.4. Other function operation
24
Remote controller
