mundoclima ALL IN ONE Type Air-source Heat Pump Water Heater, Installation & Owner'S Manual

Page: 15 / 22

11
Installation & Owner‘s Manual
Fig.8-9
Fig.8-10
Press the “UP” and “DOWN” key, you can
Increase or decrease the water temp.
When the set temp. is higher than 50 ℃,
the HIGH TEMP indicator will light.
HIGH TEMP
Timer
User can set up a running start time and a stop time on a
specifically by the timer function.
ten minutes.
Time on: User can set up a start time by this. The unit will auto
run one time between the set time and 24:00 on the same day.
Method for set
Fig.8-11
Fig.8 -12
Cancel:
CANCEL
In the unlocked state, press the CANCEL
key 1s and the time on function will be
canceled.
Press the TIME ON key again and wait
about 10s, flashing stops and ON TIMER
set is finished.
TIME
ON
Press the TIME ON key, the minute digit
of the clock on the display starts flashing
slowly.
Press the TIME ON key again, the minute
digit stop flashing and the hour digit starts.
Press the “UP” and “DOWN” key, you can
adjust the minute.
Press the “UP” and “DOWN” key, you can
adjust the hour.
The
least numbers of timer is
Time on and Time off: Users can set up a running start time and
a stop time. When the start time is earlier than the stop time,
the unit will run between the set time. When the start time is
later than the stop time, the unit will run between the start time
today and the stop time next day,when user set up on a running
start time and a stop time at the same time, the stop time will be
delay ten minutes automatically.
Method for setting
TIME
ON
Press the TIME ON key, the minute digit
of the clock on the display starts flashing
slowly.
Press the “UP” and “DOWN” key, you can
adjust the minute.
TIME
ON